Beko CLEARPOINT M010 Installation & Operation Instructions Download Page 55

Page: 55 / 56

EU-decl_CP_M025-M030-W_FL2_Kat.II_us-en_09_2017.docx

BEKO

TECHNOLOGIES GMBH

Im Taubental 7

41468 Neuss

GERMANY

Phone: +49 2131 988-0

www.beko-technologies.com

EU Conformity declaration

We herewith declare that the products identified in the following are in accordance with the requirements of the

relevant directives and technical standards. This declaration only refers to products that are in a condition in which

they were delivered by us. Parts that were not attached by the manufacturer and/or subsequently performed

interventions are not included.

Product designation:

CLEARPOINT

… container for water separator

Models:

M025W, M030W

Max. Operating Pressure:

16 bar (g)

Product Description and Function:

Container for CLEARPOINT® water separator

Pressure Equipment Directive 2014/68/EU

Conformity assessment process applied:

Module A2

Category:

Description of pressure equipment:

Pressure equipment for group 2 fluids

Notified agency:

TÜV NORD Systems GmbH & Co. KG

Große Bahnstraße 31

22525 Hamburg

Certificate no.:

07/202/1410/Z/0237/17/D/0035

Products are labeled with the symbols pictured:

0045

The manufacturer has the sole responsibility for issuing this conformity declaration.

Signed for and on behalf of:

Neuss, 9/1/2017

BEKO

TECHNOLOGIES GMBH

i.V. Christian Riedel

Manager Quality Management

Installation and operation instructions

CLEARPOINT

Water separator

55 | 56

Summary of Contents for CLEARPOINT M010

























































Search results

Summary of Contents for CLEARPOINT M010

Reviews:

Related manuals for CLEARPOINT M010

Brands by name

Popular brands

Beko CLEARPOINT M010, Installation & Operation Instructions

Search results

Summary of Contents for CLEARPOINT M010

Reviews:

Related manuals for CLEARPOINT M010

Brands by name

Popular brands