Installation and Operation Manual
BEKOKAT
®
V01 /11-046
19 / 88
1.7
Intended use
The
BEKOKAT
®
is used to remove oil from the compressed air. The compressed air must be
free of aggressive, corrosive, caustic, toxic, flammable or oxidising substances.
Any other utilisation is thereby considered to be non-intended use.
The manufacturer shall not be liable for damage caused by improper use. All responsibility for
any other possible resulting damage will be solely borne by the owner and/or operator.
The proper and safe operation of the
BEKOKAT
®
includes compliance with the installation
instructions in this manual, in particular the instructions regarding:
Location of installation/operation, installation conditions
Voltage supply and frequency
Pressure and temperature of the inlet air
Ambient temperature
Media of fluid group 2 according to DGRL 2014/68/EU free of aggressive, corrosive,
caustic, toxic, flammable and oxidising components
Surrounding area free of aggressive, corrosive, caustic, toxic, flammable or combustion
supporting materials and substances.
Connecting the alarm contacts and their signal processing.
The system is delivered as approved at the factory. The operator only has to carry out the
connections to the supply networks as described in the following chapters.
WARNING
Equipment to prevent dangerous conditions
The
BEKOKAT
®
must not be utilised as the sole means of averting
dangerous conditions on machinery and plants.
All machines and plants must be designed in such a way that
malfunctions or faulty conditions do not pose a danger to operation
personnel.
