Installation and Operation Manual
BEKOKAT
®
V01 /11-046
55 / 88
Commissioning
5.1
Safety instructions
DANGER
Compressed air! Gases under high pressure
Any contact with escaping compressed gas or not secured
system parts will create danger of serious injuries or death.
Only execute
installation work and
maintenance work in a
depressurised status.
Always inspect all system parts before pressure build-up and tighten
them.
Open valves slowly to prevent pressure blow outs during operation.
The general statutory safety and accident prevention regulations
apply.
DANGER
Risks due to damaged components
If you suspect that the
BEKOKAT
®
is damaged, then do not put it into
operation. Damaged components can impair the functional safety and
cause additional damage.
DANGER
Excessive pressure / temperature
Suitable measures must be implemented to ensure that the
permissible operating pressure and operating temperature are not
exceeded on the plant.
It is the duty of the operating company to ensure that the connected
pressure generator is protected against exceeding the maximum
operating excess pressure of 16 bar (g) and the temperature limits on
the
BEKOKAT
®
.
It must be ensured that the pressure generating compressor and the
compressed gas system are secured and safe.
Suitable measures must be implemented to ensure that the
permissible operating temperature is not inadvertently exceeded by
ambient conditions at the installation location.