Installation and Operation Manual
BEKOKAT
®
58 / 88
V01 /11-046
5.3
Operation
NOTE
Safe operation
The assembly unit must only be operated and serviced according to the
information in the operating instructions to ensure safe operation.
In addition to these instructions, always comply with the required
statutory regulations for the application cases for system operation and
company safety regulations as well as accident prevention regulations.
This also applies to the use of accessories and spare parts.
Non-compliance with these installation and operating instructions can
cause hazards for people and the plant.
WARNING
Operation of plant outside limit range
If the specified limits are undershot and/or exceeded, then function and
operating malfunctions could occur and cause danger for people and
material.
BEKOKAT
®
may only be used in accordance with its intended use
and within the permitted limiting values stated on the rating plate as
well as in the technical data.
The maximum compressed air volume flow at the inlet of the
BEKOKAT
®
plant must not exceed 360 m³/h (refer to the data on the
rating plate as well as in the technical data).
