9.3.4 Alarm enable:
EnbL
This function allows the alarm to be enabled or
disabled without altering any of the alarm parameters.
Using the
&
or
*
push button select
AL1
or
AL2
from the configuration menu and press
(
to access
the alarm sub-menu. Press the
&
or
*
button until
EnbL
is displayed followed by
(
which will reveal if
the function is
on
or
off.
The setting can be changed
by pressing the
&
or
*
push button followed by the
)
button to return to the alarm sub-menu.
9.3.5 Type of alarm:
tYPE
Alarm 1 and Alarm 2 are totally independent, both
may be speed or run-time alarms, or one may be
conditioned for speed and the other for run-time.
Using the
&
or
*
push button select
tYPE
from the
selected alarm sub-menu and press
(
to check or
change the function. The
&
or
*
push button will
toggle the selection between
5PEEd
and
Hour5
, when
set as required press the
)
button to return to the
alarm sub-menu.
Note:
When
tYPE
is changed, the alarm
configuration is automatically reset to the
default values and the alarm is disabled. It
must therefore be reconfigured before use.
33
Summary of Contents for BA314NG
Page 1: ...Issue 5 9th July 2019 BA314NG Ex nA and Ex tc Tachometer Issue 5...
Page 16: ...16...
Page 17: ...17...
