manualshive.com logo in svg

Beckman Coulter SX4750A, Instruction For Use, Installation And Assembly

Share
Download
Beckman Coulter SX4750A Instruction For Use, Installation And Assembly Download Page 39

GX-TB-004EE   

1-29

SX4750A Swinging-Bucket Rotor

Care and Maintenance  

Aerosolve Cannisters

WARNING

When working with potentially hazardous materials, open cannisters in an 

appropriate hood or biological safety cabinet in case of tube breakage.

If a glass tube breaks in an Aerosolve cannister tube rack, discard and replace the O-ring and rubber 

tube cushion in the base of the rack. Imbedded glass particles that remain in the bucket or adapters 

can break tubes during subsequent runs.

SST or Corvac Tubes

If an SST or Corvac tube breaks, the tube’s silicone gel barrier material becomes laced with glass 

fragments and the tube contents contaminate the entire tube adapter and bucket (or tube rack and 

cannister).

If one of these tubes breaks in an adapter i

n a bucket

, use the following procedure.

1

Fill the bucket with water.

2

Autoclave the entire bucket and contents at 121°C for 20 minutes.

3

Decant any remaining water and dislodge the tube adapter (do not remove it) over a waste 
container.

4

Working under a hood and using plastic gloves, immerse the bucket and tube adapter (intact) 
in a beaker or similar vessel containing ethyl acetate.

*

5

Scrub the adapter with a brush and decant the ethyl acetate mixture into a waste bottle for 
proper disposal.

6

Rinse with water and air-dry the bucket and tube adapter.

If one of these tubes breaks in an 

Aerosolve cannister,

 use the following procedure.

1

Working in a biologic safety cabinet and wearing plastic gloves, open the cannister and 
immerse the cannister, lid, and contents (intact) in a beaker or similar vessel containing 6% 

sodium hypochlorite (undiluted bleach).

* Flammability hazard. Do not use in or near operating centrifuges.

Summary of Contents for SX4750A















































Reviews:

No comments

Brands by name

Popular brands

Load more brands