manualshive.com logo in svg

Beckman Coulter SX4750A, Instruction For Use, Installation And Assembly

Share
Download
Beckman Coulter SX4750A Instruction For Use, Installation And Assembly Download Page 22

GX-TB-004EE   

1-12

SX4750A Swinging-Bucket Rotor

Loading the Buckets  

Using Aerosolve Cannisters

CAUTION

Do not run chloroformed samples in Aerosolve cannisters. Chloroform vapors 

can damage the cannister material.

Aerosolve cannisters can be used as wide-mouth bottles or with tubes in racks that are specially 

designed to fit in the cannisters. 

Table 1

 lists the Aerosolve tube racks and the number and sizes of 

tubes they accommodate. When Aerosolve cannisters are used in the SX4750A rotor buckets, pads 

(361269) must be placed beneath the cannisters in the buckets to provide support and prevent the 

cannisters from being damaged during centrifugation. These pads are included in the Aerosolve 

cannister kits (359232). Bucket covers cannot be used with Aerosolve cannisters.

Using Blood Bag Cups

NOTE

This rotor is suitable for obtaining cell-free plasma or for cell packing.

The yellow 90-mm cup (356856) accommodates up to two single bags or one double pack; the orange 

97-mm cup (356857) supports either one triple or one quad pack. 

Do not pour liquid directly into blood 

bag cups

. Fit blood bags into cups before loading the cups into the rotor buckets. Load the blood bag 

cups as follows:

1

Load the bags as far down into the cups as possible.

NOTE

Make sure the bags stay as vertical as possible, with no folds at the top or corners. If folds are 

present, blood cells could remain in the folds and then mix with the plasma when the bag is removed.

2

Sandwich the tubing between the blood bag and any transfer packs (see 

Figure 3

).

1.

Aerosolve Tube Rack

Summary of Contents for SX4750A















































Reviews:

No comments

Brands by name

Popular brands

Load more brands