Beckhoff EL3773, Documentation

Page: 136 / 179

Commissioning
EL3773 136 Version: 2.5
Table of contents
• Example 1: Diagnosis and evaluation of input data [ } 136]
- Commissioning of the example program [ } 139]
• Adaptation of the PLC to the selected oversampling factor [ } 139]
• Adaptation of the calculation of voltage and current from the raw data [ } 140]
- Description of the function of the example program
• Visualization [
}
141]
• Selection of the size of the FIFO buffer [ } 142]
• Performance of the calculations [ } 143]
- Starting the example program [
}
144]
• Procedure for starting the program [
}
145]
6.11.1 Example 1: Diagnosis and evaluation of input data
Download: (https://infosys.beckhoff.com/content/1033/el3773/Resources/zip/2041395339.zip)
Note
Usage of this example program
This example program was created on a powerful Beckhoff C6920 Industrial PC and re-
quires high computing power.
While testing this program, the following factors should be considered:
• In all tasks, the exceeding counters should not increment and an even utilization should be displayed.
• If an uneven execution of the PLC program is unavoidable, the activation of IoAtTaskBegin should be
considered
• You should decrease the buffer size, if necessary, advice regarding this is given below
• If the EL3773 indicates sync errors in the ADS logger window
or in the DiagMessages,