manualshive.com logo in svg

Becker TRAFFIC ASSIT 7928, Operating Instructions Manual

Share
Download
Becker TRAFFIC ASSIT 7928 Operating Instructions Manual Download Page 98

98

>>>

SETTINGS

> D

> GB

> F

> I

> E

> P

> NL

> DK

> S

> N

> FIN

> TR

> GR

> PL

> CZ

> H

> SK

Tones

You can switch the Traffic Assist signal
tones on and off. This can also be effected
by clicking on the display buttons.

>

Press 

Tones

.

Depending on the previous setting, the
signal tones are switched on or off. The
current setting is indicated via display of
the relevant icon in colour. 

• Left icon: Tones switched on
• Right icon: Tones switched off

Automatic on/off 

The Traffic Assist can switch
automatically to sleep mode when the
vehicle ignition is switched off. 
Prerequisite: 
• The Traffic Assist must be connected to 

the vehicle cigarette lighter (see also 
page 23). 

• The cigarette lighter is de-energized 

after the ignition is switched off. 

• The relevant function can be switched 

on at the Traffic Assist. 

Switching the function on / off

>

Press 

Automatic on/off

. 

Depending on the previous setting, the
function will be switched on or off. The
current setting is indicated via display of
the relevant icon in colour. 

• Left icon: The function is switched on, 

the Traffic Assist does switch off auto-
matically. 

• Right icon: The function is switched 

off, the Traffic Assist does not switch off 
automatically. 

FM transmitter

If the FM transmitter function is activat-
ed, all audio outputs (e.g. navigation voice
announcements, music) of the Traffic As-
sist are transmitted on a certain radio fre-
quency. If the corresponding frequency is
now set on the installed radio, the audio
output of the Traffic Assist can be heard
via the radio. 

Note:

Operation of the FM transmitter is not
permitted in all countries. The use of the
FM transmitter in countries in which op-
eration is not permitted, may result in
criminal prosecution.
During activation of the transmitter, you
are prompted to declare in which country
the transmitter is to be operated. You
then receive information as to whether
the use of the FM transmitter is permit-
ted in this country. Please note that this
information is only valid at the time of
delivery of the Traffic Assist. Subsequent
changes are not taken into account. 
Please also note that when crossing bor-
ders, other laws and regulations may ap-
ply which prohibit the use of the trans-
mitter.

Summary of Contents for TRAFFIC ASSIT 7928













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands