manualshive.com logo in svg

Becker TRAFFIC ASSIT 7928, Operating Instructions Manual

Share
Download
Becker TRAFFIC ASSIT 7928 Operating Instructions Manual Download Page 70

70

>>>

NAVIGATIONAL MODE

> D

> GB

> F

> I

> E

> P

> NL

> DK

> S

> N

> FIN

> TR

> GR

> PL

> CZ

> H

> SK

Information continues to be displayed in
the bottom left corner of the preview area.

For this purpose, the further route is dis-
played via an arrow with distance infor-
mation given below it. If two driving ma-
noeuvres are to be performed in
succession within a short time, an addi-
tional smaller arrow for the second driving
manoeuvre appears above the first one.

Depending upon the setting, additional
information may be shown in the map
display. See "Additional information" on
page 72.

Map display with reality view

At many motorway junctions, a detailed
and realistic display of the motorway
junction can be shown.
For this purpose, activate the function 

Re-

ality View

 in the settings under "The

Junction info button" on page 62. 
If you are guided via a motorway junction
by Traffic Assist, the appropriate display is
shown.

Then follow the lanes marked by the red
arrows.

Map display with toolbar

Press the following key to activate the
toolbar. Press again to deactivate the tool-
bar.

The following function keys are displayed
in addition to the map display.

Summary of Contents for TRAFFIC ASSIT 7928













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands