7
installation guide
Ensure batteries are correctly installed in the back of
the remote.
Quickly test functions to verify proper setup before
placing mattress on base. Press FLAT to return the
base to a flat position.
Uncoil the Power Cord and connect to the Power Supply.
Place Power Supply on the ground and extend from
the base.
Ensure that the Power
Supply and all attached
cords are directed
toward the desired
surge protector.
Carefully flip the base over on to its legs.
Important: Two people are required to move the bed
base. Do not drag across the floor. Do not rest frame
on its side, excessive pressure may damage the legs.
Plug the base into a power source. A surge protector is
strongly recommended.
STEP 7
Always use two people when setting up the base
STEP 6
STEP 9
STEP 8
STEP 10
Basic setup is now complete!
WARNING
Always unplug the base from the electrical outlet before servicing any
part of the base. To reduce risk of electric shock, unplug the base before
cleaning. To safely disconnect, ensure the base is in a flat position with all
motors off, and unplug from power source.
Locate the mattress retainer
bar brackets.
Slide the left side of the mattress
retainer bar into the bracket.
Pull the retainer bar to the
opposite bracket and secure
the right side.