1.3 Warnings
Chapter 1 Introduction
2
pH SAFE Reader Operator Manual - Doc. No. 120001-09
Appendix A, Power-On Self Check (SELF-CHK)
Appendix B, Serial Port Results Upload
Appendix C, Ethernet Setup
1.3
Warnings
Conventions
Shock Potential when Power Improperly Applied
Ensure that the system is connected to a power receptacle that provides voltage
and current within the specified operating range. Use of an incompatible power
source may produce electrical shock and fire hazards.
Shock Potential from Spilled Liquids
If liquid is spilled onto the instrument, fluid seepage into internal components
creates a potential shock hazard. If liquid is spilled onto the instrument,
disconnect power and clean/dry the instrument surfaces.
Do Not Remove Instrument Cover
The
pH SAFE Reader
contains no user-serviceable components. The
manufacturer warranty is voided if the instrument cover is removed.
Use only Supplied AC Power Adapter Cables for pH SAFE Reader and
Printer
A power adapter is supplied for specific use with the
pH SAFE Reader
. If the
optional Printer accessory will be used, an additional power adapter is also
supplied for specific use with the Printer.
DO NOT interchange the
pH SAFE Reader
and Printer AC power adapters.
Always ensure the proper supplied AC power adapter
is used for each device.
Failure to do so may result in damage to the instrument and/or the Printer.
Ensure Instrument Power is OFF before connecting Bar Code Scanner
DO NOT connect the Bar Code Scanner to the
pH SAFE Reader
after the
instrument is turned ON. Doing so may result in damage to the Bar Code
Scanner.
This symbol indicates a potential hazard where misuse of the
system could result in damage to the equipment.
This symbol indicates a potential hazard where misuse of the
system could result in electric shock or fire.
!
!
!
!
Summary of Contents for pH SAFE PH1000
Page 2: ......
