6.5 System Settings
Chapter 6 Using the Options Menu
44
pH SAFE Reader Operator Manual - Doc. No. 120001-09
2. The following screens are briefly displayed in succession:
ERROR:
If there are no records stored in the memory the following error
message will be displayed:
Pressing any key will return you to the
System Menu
.
When the packing process is completed the following message is briefly
displayed:
Next the display returns to the
System Menu
.
6.5.8
Ethernet Setup
Use this function to configure Ethernet communication parameters to enable
automatic upload of results data to an external computer or LIS.
NOTE:
When configuring Ethernet communication parameter enter specific
values for each parameter as provided by the site’s LIS System
Administrator.
Proceed as follows:
1. From the
System Menu
screen, use the
Up / Down Arrow
keys as necessary to
scroll the list until the
7. ETHERNET SETUP
option is displayed on the lower
line of the screen. Press the
<Enter>
key to select use of this function.
2. The screen updates to display the
Ethernet Menu
, with the first setup
parameter in the menu displayed on the lower line:
3. There are three Ethernet setup parameters and an exit option available from
this menu:
1. IP ADDRESS
2. NETMASK
3. DEFAULT GATEWAY
4. EXIT ETHERNET
Proceed as follows:
IP Address
4. From the
Ethernet Menu
screen, use the
Up / Down Arrow
keys if necessary to
scroll the list and ensure the
1. IP ADDRESS
parameter is displayed on the
UPDATING ETHERNET
PLEASE WAIT
PACKING MEMORY . . . .
NO TEST RECORDS IN
MEMORY! PUSH A KEY.
MEMORY HAS BEEN
PACKED
*** SYSTEM MENU ***
7. ETHERNET SETUP
* * ETHERNET MENU * *
1. IP ADDRESS
Summary of Contents for pH SAFE PH1000
Page 2: ......
