6.5 System Settings
Chapter 6 Using the Options Menu
pH SAFE Reader Operator Manual - Doc. No. 120001-09
45
lower line of the screen, then press the
<Enter>
key. The following screen is
displayed:
Where
###.###.###.###
indicates the current setting for the IP address. The
cursor is placed below the first number in the first segment indicating that this
value is available for editing.
From this screen enter the numeric IP address for this instrument, as assigned
by the LIS System Administrator
.
The IP address must be a series of numeric
characters in the format
###.###.###.###
. The address must include all three
(3) numbers for each of the four segments of the address, including zeros if
necessary. A typical IP address will be similar to the following example:
192.168.001.101
.
When the appropriate IP address has been entered, press the
<Enter>
key to
accept the address entry and return to the
Ethernet Menu
.
NOTE:
If you make an error when entering the IP address information, press
the
<Options>
key to clear the current entry and start over.
To cancel use of this function, press the
<Options>
key again to return
to the
System Menu
.
Netmask
5. From the
Ethernet Menu
use the
Up / Down Arrow
keys as necessary to scroll
the list until the
2. Netmask
option is displayed on the lower line of the screen.
6. From this screen press the
<Enter>
key. The following screen is displayed:
Where
###.###.###.###
indicates the current setting for the Netmask address.
The cursor is placed below the first number in the first segment indicating
that this value is available for editing.
From this screen enter the numeric Netmask value for the site’s LIS network,
as specified by the LIS System Administrator
.
The Netmask must be a series
of numeric characters in the format
###.###.###.###
. The address must
include all three (3) numbers for each of the four segments of the address,
including zeros if necessary. A typical Netmask value will be similar to the
following example:
255.255.255.000
.
When the appropriate Netmask value has been entered, press the
<Enter>
key
to accept the entry and return to the
Ethernet Menu
.
NOTE:
If you make an error when entering the Netmask information, press
the
<Options>
key to clear the current entry and start over.
To cancel use of this function, press the
<Options>
key again to return
to the
System Menu
.
* ENTER IP ADDRESS *
###.###.###.###
* * * *
* * ETHERNET MENU * *
2. NETMASK
* ENTER NETMASK *
###.###.###.###
* * * * *
Summary of Contents for pH SAFE PH1000
Page 2: ......
