Page
25
Direct
Port
Connection
Radius
Configuration
Menu 5: Network Radius Configuration
Select D),
Delete
user
:
The Unit re-displays the “User
Menu” minus the deleted user
A)...Add user
D)...Delete user
1)...Engineer
2)...root
Enter Request :d
From menu above, enter number for user to delete>1
User Management Menu
To change user password or port access, enter number of user.
To add/delete user, select appropriate menu choice.
SNMP V3 requires passwords that are between 8 and 31 characters long
Enter request, CR to exit menus.
A)...Add user
1)...root
Enter Request :
Radius login is...................Disabled
Enable ? (Y/N), CR for no change) :
Radius Server IP Address is: 0.0.0.0
Enter radius server address in dotted decimal form :
Radius Backup IP Address is: 0.0.0.0
Enter radius server address in dotted decimal form :
Radius secret is: HardlyASecret
Enter radius secret (16 chars max).
:
Radius Enable....................1
Radius Server Address............2
Radius Backup Server Address.....3
Radius Secret....................4
Enable DS62 usernames as backup..5
Radius Login Timeout.............6
Radius Server Port...............7
Exit.............................X,CR
Select 1,
Radius
Enable
enables radius authentication. If
enabled, the primary radius server address must be specified
Select 2,
Radius
Server
Address
specifies the
radius server IP addresses
Select 3,
Radius
Backup
Server
Address
specifies the backup server IP addresses
Select 4,
Radius
Secret
sets the shared radius secret. A secret can
be up to 16 characters and must be exactly the same as the secret
stored on the server.
Select 3, from the Log In Menu,
Radius is used to
authenticate logins for the serial and the network ports
if passwords and user names are enabled in the unit. If
the Radius server rejects either the username or
password or does not respond, the unit will display
“Invalid Password”.
Direct Port Connection is.........Enabled
Enable ? (Y/N), CR for no change) :
This will allow the user to be connected directly to a DS serial
port, as determined by the TCP port, starting at TCP port 50001
