Page
43
DS62
MD4
Modem
Configuration
Menu
Menu 13: Modem Configuration Menu
Modem
Port
Configuration
Handshaking
If the unit displays the
following, type
“Y”
at the
prompt. The unit will wait
for the ASCII file to be
transfer via FTP.
Send file in ASCII file mode.
Waiting for RC firmware.
-------------------------------
Upgrading RC firmware on RPC at module 2, port 1.
Enable update of Relay Controller firmware via Console FTP.
Enabling will reset Ethernet Module when Configuration is exited
Enable Firmware Upgrade ? (Y/N) y
CAUTION:
The unit may not read the data correctly if the terminal program tries
to upload the file as a modem file, i.e. ZModem. Verify the file transfer is ASCII.
Modem Port Configuration..................1
Rings to Auto Answer......................2
Modem Connectivity Timeout................3
Modem Inactivity Timeout..................4
Modem Device Name.........................5
PPP Configuration.........................6
Country Code..............................7
Enter Request :
Select 1),
the Modem Port Configuration and the Host Module displays the following menu:
The
Default configuration is 9600, 8, 1, none.
+----+------+-----------------+------+------+------+------+---------+----+----+
|Port|Device| Device | Baud | Word | Stop |Parity|Handshake|LineDrive|
| | Type | Name | Rate | Size | Bits | | |DTR |RTS |
+----+------+-----------------+------+------+------+------+---------+----+----+
| 2 | MODEM| Host V90 Modem | 9600 | 8 | 1 | None | None | LO | LO |
+----+------+-----------------+------+------+------+------+---------+----+----+
Handshaking......................1
Baud Rate........................2
Word Size........................3
Stop Bits........................4
Parity...........................5
Enter Request :
Select 1),
changes “Handshaking” and the DS displays with the
following:
Default is None
Select handshaking:
1 For None
2 For Software Handshaking
3 For Hardware Handshaking
Enter Request :
