Page
45
Modem Inactivity Timeout
Modem Configuration Menu: Option 5), Modem Device Name
PPP
Configuration
Select 4),
from the Modem Configuration Menu, this option
sets the time the modem will automatically disconnect, if there
is no activity equaling the programmed amount of time (1 to
120 minutes).
Default setting is
0 (disabled)
.
Select Modem Inactivity Timeout and the module display the
following:
Modem Inactivity Timeout (Minutes): 60
Enter Timeout (1-120 minutes, 0 to disable):
Select 5), from the Modem Configuration Menu, changes the
Modem Device Name and the following is displayed:
Modem Device Name: Host V90 Modem
Enter Device Name (<= 16 characters):
Important:
Changes are NOT saved until you back out of the
Configuration menu. You should be asked to Accept changes.
Accept changes ? (Y/N) :y
Changes accepted.
PPP is............................Disabled
Enable ? (Y/N), CR for no change) :
Select 1), to enable the PPP feature.
Default is Disabled
Select 2) to assign an IP Address to the
dialed in user.
Default is 0.0.0.0
Select 3) to enable the IP Foward feature.
Default is Disabled
Select 4) to enable the CHAP feature.
Default is Disabled
Select 5) to enable the CHAP Secret
password feature, minimum of (16)
character.
Default is baytech
Enter Dial-In IP Address in dotted decimal
form :
Select 6),
from the Modem Configuration Menu, the PPP is similar to the dial in modem used by
telephone DSL or local cable access. PPP establishes a negotiated connection between two devices.
Once connected an assigned IP address is sent to the other device. The logged in user will have
network access to the local network. To use this feature, enable PPP & provide the IP address for the
dial-in user. Enable CHAP for a stronger security over Password protection. The CHAP (Challenge
Handshake Authentication Protocol) feature
will disable PAP. The Ip forwarding acts
like a router if connected to HTTP. Once
connected, the user can access the DS62MD4
or the internet using any network access
program (Telnet/SSH/SNMP/HTTP, etc).
If CHAP is enabled CHAP Secret is used.
PPP Configuration
PPP is disabled
Dial-In IP Address................. 0.0.0.0
Enable PPP................................1
Dial-In Client IP Address.................2
IP Forward Enable.........................3
CHAP Enable...............................4
CHAP Secret...............................5
PPP IP Forwarding is...............Disabled
Enable ? (Y/N), CR for no change :
PPP CHAP is........................Disabled
Enable ? (Y/N), CR for no change :
PPP Secret: baytech
Enter CHAP Secret (16 characters max)
