Page
15
STATUS
MENU
Status Menu 1: Network Status
Overall
System
Status
Network
Status
Logged
Users
Memory
Usage
Current
Routing
Cache
Select 1),
System Status provides information about the local
memory, how many TCP sockets are in use, and the time the unit
has been operating since the last unit reset or power up.
System Status:
Available local memory: 7598080
TCP sockets in use: 0
System up time (dd:hh:mm:ss): 0:00:50:10
Press ENTER to continue
eth0 Link encap:Ethernet HWaddr 00:C0:48:00:01:FD
inet addr:192.168.2.136 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Base address:0x840
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
Press ENTER to continue
Select 2),
Network Status contains the
MAC address, IP address, Mask, TX/RX
packets and their status.
C=configuration user *=current process
Active Users:
# USER FROM INTERNAL CONN STATUS PID
1 root localhost
Normal 23
C 2 root 70.150.140.69
Normal 490
* 3 root 70.150.140.66
Normal 492
Strike T, CR to terminate a connection/process, CR to continue :
Select 3),
to show the name of the user account, the
type of interface (serial or network) and the status of
the active sessions
Enter number of connection to terminate, CR :
Terminate a session by typing
“T”
at the prompt. The
unit will display the following:
total: used: free: shared: buffers: cached:
Mem: 11735040 4136960 7598080 0 380928 458752
Press ENTER to continue
Select 4),
to see where your memory is
being utilized.
Select 5),
to see the IP Data
currently held in cache or none
upon power cycle.
DS62 Status Menu.
Enter selection, CR to exit.
Overall System Status.............1
Available memory, System up time
Network Status....................2
IP address, MAC, packets
Logged Users......................3
Active users, admin terminates users
Memory Usage......................4
Memory statuses
Current Routing Cache.............5
Current routing caches
Route Setup.......................6
Routing table
Processes.........................7
Processes in memory
UnitInfo Database.................8
Data collection
Enter Request :
Kernel IP routing cache
Source
Destination
Gateway Flags Metric Ref Use Iface
66.186.36.195
70.150.140.86
70.150.140.86 l 0 0 1 lo
70.150.140.86
66.186.36.195
70.150.140.65 0 0 0 eth0
70.150.140.69
70.150.140.86
70.150.140.86 il 0 0 154 lo
207.206.133.250
70.150.140.86
70.150.140.86 l 0 0 76 lo
Press ENTER to continue
