Page
36
All
Sensors
Outlet
Groups
List
Outlet
Groups
For configuration of all sensors of selected type in system with a
single user-supplied value.
1...Contact
2...Temperature
3...Humidity
4...Air Flow
Enter Request :1
RPC/RPS External Environmental Sensor Configuration Menu
Sensor Number: 2 Name: External Sensor2 Type: Temperature
1...High Threshold (tenths of meas. unit): 0
2...High Threshold Trap Enable: Disabled
3...Low Threshold (tenths of meas. unit): 0
4...Low Threshold Trap Enable: Disabled
Enter Request :1
RPC/RPS External Environmental Sensor Configuration Menu
Sensor Number: All Name: all RPCs/RPSs
Type: Temperature/Humidity/Air Flow
1...High Threshold (tenths of meas. unit): NP
2...High Threshold Trap Enable: NP
3...Low Threshold (tenths of meas. unit): NP
4...Low Threshold Trap Enable: NP
Enter Request :
Enter threshold value in tenths of unit measurement (degrees,%%,etc.):
Second line identifies the probe name
and type. Option 1 and 3 sets the
temperature levels to the tenth of a
degree. Option 2 and 4 enable the
SNMP traps to be sent if the
corresponding threshold had been
exceeded
Select 2),
to set parameters for the different probe types.
This feature is useful for standardization and the probe type
is known.
Environmental Sensor Configuration Menu
Sel M/P Identifier
1 2/1 MSP10
2 All Sensors
Enter Request :2
Option 1 and 3 sets the temperature
levels to the tenth of a degree. Option 2
and 4 enable the SNMP traps to be sent
if the corresponding threshold had been
exceeded.
NOTE:
NP = No Probe detected.
NOTE:
The type ‘Contact’ signifies a
door switch is open even if the switch
is not detected, but still be able to
send SNMP Traps.
# Group Name Outlets
1 Router GP-A 2.1.1,2.1.2,2.1.3,2.1.4
2 Server Row 2.1.5,2.1.6,2.1.7,2.1.8
3 Radius 2.1.9,2.1.10,2.1.11,2.1.12
4 Server backup 2.1.13,2.1.14,2.1.15,2.1.16
Outlet Group Configuration:
List Outlet Groups...............1
Add Group........................2
Delete Group.....................3
Rename Group.....................4
Modify Outlets in a Group........5
Delete All Outlet Groups.........6
Enter Request :1
Select 6, from the RPC Management Menu,
allows
user to combine outlets from different modules and
ports. One SNMP command is used to turn off/on or
reboot the group
Select 1),
to list any outlet groups:
