43
Software update
43
Software update
PoolManager
®
internal software (firmware) can be updated at any time
using a standard USB memory stick.
The most current software version will be available for download in the
retailer section on the BAYROL website.
All software is packed into one file (file size ca.
changes with each version and has the following format, for example:
firmware_PM5-2.2.3-4882.bin. In this example, 2.2.3 indicates the
software's version number.
43.1
Step by step
IMPORTANT NOTICE!
Loss of power during software update
Ensure that PoolManager
®
is continuously supplied
with power throughout the entire software update. If
there is a power outage during the updating process,
then the update will fail and will definitely have to be
repeated.
IMPORTANT NOTICE!
Plugging in the USB memory stick
PoolManager
®
USB interface supports hot plug & play,
i.e the memory stick can be plugged in during ongoing
operation.
However, it is expressly recomm
PoolManager
®
power supply when doing so. When
plugging in during ongoing operation
PoolManager
®
sensitive electronics to be damaged due
to electrostatic charges upon coming into contact.
1.
Copy the file with the current software into the main direc
(root directly) on your USB memory stick (e.g.. M:
under any circumstances, copy the file to a sub
PoolManager
®
only searches for potential software updates in
the root directory.
2.
Turn off PoolManager
®
power supply.
3.
Open the front of PoolManager
®
casing as shown in the
following figures.
User Manual PoolManager
®
internal software (firmware) can be updated at any time
The most current software version will be available for download in the
All software is packed into one file (file size ca. 25 MB). The file name
changes with each version and has the following format, for example:
4882.bin. In this example, 2.2.3 indicates the
Loss of power during software update
is continuously supplied
with power throughout the entire software update. If
there is a power outage during the updating process,
then the update will fail and will definitely have to be
the USB memory stick
USB interface supports hot plug & play,
i.e the memory stick can be plugged in during ongoing
However, it is expressly recommended to turn off
power supply when doing so. When
plugging in during ongoing operation, it's possible for
sensitive electronics to be damaged due
to electrostatic charges upon coming into contact.
Copy the file with the current software into the main directory
(root directly) on your USB memory stick (e.g.. M:\). Do not,
under any circumstances, copy the file to a sub-directory, for
only searches for potential software updates in
casing as shown in the
4.
Please the US memory stick with the sof
PoolManager
®
internal USB slot.
5.
Close the front of the casing and turn the power supply back on.
6.
Wait until the boot procedure is complete.
This takes ca. 1 - 2 minutes.
7.
Select the software update function in the menu as follows:
Service functions
Software update (from USB stick)
8.
Press the button
Start software update
9.
PoolManager
®
automatically performs a restart in order to
launch the software update
10.
The screen background is black throughout the update. There
are various icons and text messages to inform you about the
software update's progress.
11.
The updating process takes abo
Once competed, PoolManager
restart and will boot with the updated software.
12.
You can then remove the USB stick. T
PoolManager
®
voltage supply.
78
Please the US memory stick with the software update into
internal USB slot.
Close the front of the casing and turn the power supply back on.
edure is complete.
2 minutes.
Select the software update function in the menu as follows:
Service functions
Software update (from USB stick)
Start software update
automatically performs a restart in order to
launch the software update
The screen background is black throughout the update. There
are various icons and text messages to inform you about the
software update's progress.
The updating process takes about 5 minutes.
Once competed, PoolManager
®
will perform an automatic
restart and will boot with the updated software.
You can then remove the USB stick. To do so, turn off
voltage supply.