MX08 Multichannel Weighing System, Technical Manual, Rev. 2.5 Page 57 of 144
RS-485 Address
The Modbus-RTU slave addresses are from 1 to 31.
BSI data structure slave addresses are from 0 to 9.
Default is ‘01’.
RS-485 Checksum
The checksum can be enabled or disabled from BSI data format. The checksum
calculation can be found in the related data format description.
Default is ‘Enable’.
Response Speed
Response speed can be selected as “immediate” or “20 msec” for Modbus RTU data
format.
Immediate
:
Modbus RTU Answer is sent immediately after Request is
received.
20 msec
:
Modbus RTU Answer is delayed 20 msec after Request is
received.
This property is very helpful for slow PLC systems.
Default is ‘immediate’.
8.4.2.
Modbus Information
xFace Gateway information block in Gateway tab allows the user to know much
information about gateway instrument as in the following;
Field bus: Modbus RTU
Firmware Version: Revision number of firmware
Firmware Date: Generated firmware date
Hardware Version: Revision number of main pcb board.
Serial Number: Instrument’s serial number.
Gateway Status: Follow the status whether the system is proper or not.
