BAYKAL
EDITION NO :
HGL
SECTION :
DATE OF ISSUE :
November 2009
PAGE :
24
6.5. Using the shear:
6.5.1. Requirements for the initial test and examination
•
Check the machine visually against any transport damage.
•
Clean the oil tank and the suction filter.
•
Fill the oil tank up the level indicator with one of the oil types recommended in
the Lubrication Diagram.
•
Check that the rear guard is functioning mechanically in proper.
•
Check that the blades are rigidly fixed in their places.
•
Make sure that the cables are not damaged.
•
Check the components and terminal ends inside the electrical cabinet against
any loosening.
•
Make sure that switches and buttons are not damaged.
•
Carry out the electrical connections according to section 6.5.2 and then proceed
with initial testing and start-up according to instructions in section 6.5.4.
•
During test run check that:
a)
All switches and buttons are fulfilling their functions.(in particular, emergency
buttons, safety and limit switches )
b)
There is no oil leakage in cylinders, valves, pipes and hoses.
Summary of Contents for HGL C Series
