BAYKAL HGL C Series, User Manual

Page: 11 / 104

BAYKAL
EDITION NO : HGL SECTION :
DATE OF ISSUE : November 2009 PAGE : 11
!
DO NOT operate the machine without proper blade gap adjustment
according to sheet thickness.
(See section 6.5.5.)
! DO NOT use cutting blades which are excessively blunted.
!
Check the machine daily for recognizable external damages and
defects.
!
Operate the machine only if all protective devices and guarding are
mounted and effective.
!
Take notice of any warning labels on the machine and do not
remove them.
!
In case of malfunction, immediately shut down and secure the
machine. All troubles must be eliminated before re-starting.
!
Avoid any operation which may endanger other persons and
immediately shut down the machine when a danger is noticed.
!
Shut off the machine completely before any repair work is carried
out.
!
DO NOT access into the backgauge area, while the machine is
working.
!
DO NOT bridge the safety limit switch of the rear protective fence.
!
DO NOT use side squaring arm and front support arms for
intermediate storage of workpieces.
!
During the shearing process, the workpiece may slide or move
unexpectedly. Therefore, the material must be handled carefully.
!
All connecting bolts on the machine must be checked periodically
and be re-tightened if necessary.
!
DO NOT change the default settings of the hydraulic valves.
!
When changing oil the illustration in Figure 1 of this manual must
be referred to. Make sure that dirty filters are disposed separately.
!
The operating temperature range of the oil is : (10
°
C - 65
°
C )