[email protected] - www.bay-tec.de 25
Option Selection
When you are in a function, press [UP/+] or [DN/-] to switch to different options. Press
[ENT] to confirm or [ESC] to cancel. The unconfirmed item will keep flashing until the
[ENT] button is pressed.
Value Modification
When you are in a function, press [UP/+] or [DN/-] to select the parameter that you
want to modify, press [ENT] to enter edit mode. In edit mode, the value will keep
flashing, you can change its value by pressing [UP/+] or [DN/-]. Press [ENT] to confirm
or [ESC] to cancel. Press and hold the [ENT] button more than 2 seconds can restore
the parameter to its default setting.
Specifications
Main Controller
32-bit MCU
Sensor
3-axis gyroscope and 3-axis accelerometer
Gyroscope Scale Range
±
2000dps
Accelerometer Scale Range
±
4g
Input Signal
Standard PPM with center point 1520uS, or S.Bus serial data
Output Signal
PWM max frequency 333Hz, 1520
±
500uS
Input Voltage
4.8V
～
7.4V
Operating Temp
-10
℃～
50
℃
Size
43
×
27
×
14mm
Weight
10g (excluding wires)
