[email protected] - www.bay-tec.de
2
Package Contents
Main Controller × 1
The main controller has a built-in 32-bit MCU and a MEMs sensor consist of a
3-axis gyroscope and a 3-axis accelerometer. There are up to 7 input channels and
5 output channels. It also has a 4-pin data interface for connecting the program
card and PC. A RGB LED is used to display the operation state. The main controller
is small in size and light in weight, it can be attached flat or upright, and even
upside down under the plane.
Program Card × 1
The program card is used to setup the controller more quickly and easily, especially in
the field. The card has a white backlit LCD screen and supports both Chinese and
English languages. The firmware of the card can be upgraded online and it can be also
used for other products from
Bay-Tec
.
Receiver Cable × 3
Cables used to connect the main controller and the receiver. Including male to male
power lead 15cm
×
1, combined signal lead 15cm
×
2.
Data Cable × 1
Cable used to connect the program card or PC.
USB Adapter × 1
This adapter is used to connect to the USB port of PC.
3M Double-sided Tapes × 2
The double-sided tapes are used to attach the controller on the fuselage.
