Bay Networks Remote Annex 2000, Hardware Installation Manual, Page: 56 / 136

Remote Annex 2000 Hardware Installation Guide
Chapter 2 Installing the Remote Annex 2000
2-22
BOOTP
For a successful
BOOTP
retrieval, a bootpd must be running on a host
on the same network as the Remote Annex 2000 and must have the
appropriate information in the bootptab file. The Remote Annex
2000’s
BOOTP
implementation adheres to rfc951, rfc1048, and rfc1084.
A sample bootptab file entry used to initialize the Remote Annex 2000
named terminator looks like this:
In the previous example:
❑
sm is the subnet mask.
❑
gw is the load/dump gateway address.
❑
vm is the Vendor Magic Cookie.
❑
ht is host type (1=Ethernet).
❑
ha is the Remote Annex 2000’s hardware address (Ethernet
Address).
❑
ip is the Remote Annex 2000’s Internet Address.
remoteannexdefault:\
:sm=255.255.255.0:gw=132.245.22.66:\
:hn:vm=auto:to=-18000:
terminator:\
:ht=1:ha=00802d004879:ip=132.245.22.226:\
:tc=remoteannexdefault: