8-2
118814-A Rev. A
Issue 1
Nautica Configuration Wizard Reference Guide
The Path Table
As the unit makes and receives calls it will learn new paths, and
these will be displayed in the Paths table as shown in
Figure 8-1
.
The paths learned by the Nautica router will be deleted by the unit
automatically when they become blacklisted and unused (
page
7-7
).
To view the Paths table, do the following:
1.
Select the unit that contains the paths you want to view in
the Nautica Wizard window (
page 6-6
).
2.
Click on
Advanced > Paths
.
3.
The Paths table (
Figure 8-1
) appears.
Figure 8-1.
Paths Table
The path called RemotePPP was created by the Installation
Assistant. It is the path to the remote router you specified while
running the Installation Assistant. This path can be edited further.
The path called LAN01 can have some of its properties edited,
but cannot be deleted.