9-14
118814-A Rev. A
Issue 1
Nautica Configuration Wizard Reference Guide
Parameter:
SPID 1
Default:
(Blank)
Options:
A valid SPID number
Function:
If you are using a Nautica 200 with a U ISDN interface
(North America), you will need to specify the first SPID
number. This number is used on the first B channel.
Instructions:
SPIDs are supplied by your ISDN supplier.
Parameter:
SPID 2
Default:
(Blank)
Options:
A valid SPID number
Function:
This is the SPID number for the second B channel.
Instructions:
SPIDs are supplied by your ISDN supplier.
Parameter:
Local Number 1
Default:
(Blank)
Options:
A valid local number
Function:
If you are using a Nautica 200 with a U ISDN interface
(North America), you will need to specify the first local
number. This number is used on the first B channel.
Instructions:
The local number is the local directory number assigned
by your ISDN supplier.
Note:
With certain switch configurations, this option need not
be set, or be set for the first channel only (SPID 1). You will
need to refer to your ISDN supplier to check if this is the case.