8-12
118814-A Rev. A
Issue 1
Nautica Configuration Wizard Reference Guide
Other modifiers that can be entered before telephone
numbers are shown in
Table 8-1
.
If PPTP has been enabled in the System settings (
page
7-7
), then the first number here needs to be set up as the
IP address of the originator of the PPTP tunnel, or the
Terminator of the tunnel. The following syntax must be
used:
u192.1.1.25
BOOTP Relay
BOOTP Relay allows non-IP information to be routed across your
Nautica unit. If BOOTP Relay information is to be passed along
this path, then you must enable this parameter.
Parameter:
Enable
Default:
Disabled
Options:
Disabled, Enabled
Function:
If this path is used to pass BOOTP Relay information
then you must select the Enable option. BOOTP Relay
must also be turned on in the System window (
page 7-5
).
Table 8-1.
ISDN Telephone Number Modifiers
Modifier
Description
!
V120 Calls
#
56k Calls
$
Modem Calls
F
Fax Calls