6-14
118814-A Rev. A
Issue 1
Nautica Configuration Wizard Reference Guide
4.
Click on
NO
in the Download Confirmation window and
the download will be cancelled. Click on
YES
and the
Select a File to Download window will appear:
Figure 6-7.
Select a File to Download Window
5.
Change into the folder into which you copied the file from
the Bay Networks web site.
6.
Select the new software file and click on the Open button.
7.
The new software will be loaded into the Nautica 200.
Once downloaded, you will need to configure the unit with all the
relevant parameters. To automatically configure the unit, launch
the Installation Assistant and
refer to “Configuration Using
Nautica Wizard”
on
page 6-11
. To manually configure the unit,
read the rest of this chapter.
Saving Configuration Changes
Changes you make to a Nautica router using Nautica Wizard are
implemented immediately by the unit. They are not, however,
saved. If you leave changes unsaved, you run the risk of losing the
changes you have made if the power is disconnected from the
Nautica unit, or the unit crashes.
To save the changes you have made, do the following: