manualshive.com logo in svg

Baxi POWER HT+ 1.110, Installation And Service Manual

Share
Download
Baxi POWER HT+ 1.110 Installation And Service Manual Download Page 102

9. Confirm the menu selection by pressing the button  . 

The beginning of the first time range flashes.

10. Select the end of the first time range by turning the 

 button. 

N

Note

Select the value ---:-- in order not to program a first time range.

11. Confirm the value programmed by pressing the   button.

12. Select the parameter 11st Time OFF (502, 522, 542 or 562) by turn­

ing the 

 button. 

13. Confirm the menu selection by pressing the button  . 

The current selection flashes.

14. Select the beginning of the first time range by turning the 

 button.

15. Confirm the value programmed by pressing the   button.

16. Repeat the programming for the second and third time ranges. 

Tab.58 Parameters of the time ranges

 

First time range

Second time range

Third time range

Beginning of the time range

1st Time ON (501, 521, 541 

or 561)

2nd Time ON (503, 523, 

543 or 563)

3rd Time ON (505, 525, 545 or 

565)

End of the time range

11st Time OFF (502, 522, 542 

or 562)

2nd Time OFF (504, 524, 544 

or 564)

3rd Time OFF (506, 526, 546 or 

566)

Note

Press the 

MENU

 key to return to the main screen.

Fig.

122

MW-3000135-EN-02

MENU

06:00

Time central heating CH1

Mon - Sun: 1st Time ON

Fig.

123

MW-3000136-EN-02

MENU

22:00

Time central heating CH1

Mon - Sun: 1st Time OFF

Fig.

124

MW-3000137-EN-02

MENU

22:00

Time central heating CH1

Mon - Sun: 1st Time OFF

9  Settings

102

7609474 - v02 - 04092014

Summary of Contents for POWER HT+ 1.110





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands