Baxi CBP Matic 18, Manual

Page: 212 / 249

49
a) b)
Figure 29
– Installing the sensor level in the storage unit
2
– Then, you should install the ramp to drop the pellets in the boiler’s internal tank.
For this, you should start by removing the right side cov
er of the boiler’s tank –
removing the 4 screw securing it (Figura 30).
Figure 30
– Removing the lateral cover of the boiler’s tank
3
– To assemble the ramp to drop the pellets you should insert it in the tank, as
shown in the following pictures, and fasten it with the screws previously removed.
a) b)