Baxi CBP Matic 18, Manual

Page: 179 / 249

16
The pellets may have a maximum humidity of 8% their weight. To guarantee a good
combustion, the pellets must maintain these characteristics so they should be stored
in a dry place.
The use of pellets of varied quality reduces the boiler's efficiency and leads to an
inadequate combustion process.
You should always use certified pellets and must not forget to test a sample
before buying large bulks.
The physical/chemical properties of the pellets (calibre, friction, density and chemical
composition) may vary within specific tolerances and according to each
manufacturer. Please note that this may cause alterations to the feeding process
and, consequently, the need for different doses (more or less pellets).
The boiler's pellet dosage can be adjusted during the start-up phase and at the
power thresholds of± 25% (see the manual
– temporary and power settings)
Warning!
The unit must NOT be used as an incinerator.
6. Use of the pellet-run boiler
Recommendations
Before starting up the unit, please check the following:

Guarantee that the boiler is properly connected to the power mains by means of
the 230 VAC power cable.