INSTALLER GUIDE
Page 37
16.7 To remove and fit the window mounting frame and window assembly.
When servicing the appliance it will be
necessary to remove all of the window
mounting frame and the window assembly
to enable the front coal, ceramic walls and
burner to be removed.
1.
Remove the fascia as in section 16.4.
2.
Unscrew and remove the six screws that
secure the window mounting frame and
window assembly. Remove and place away
from the work area (See figure 38).
16.8 To remove the window assembly.
1.
There is no need to remove the fascia.
To remove.
1.
The window assembly is held in place
with two brackets that rotate around a
central pivot point. Push the brackets up
and clear of the window assembly (See
figure 39). Gently pull the top of the window
forward and lift the window assembly clear of its support channels (See figure 40).
Place the window assembly in a safe place
away from the work area.
To fit.
1.
Locate the bottom corners of the window
assembly.
2.
Gently push the window assembly into
place and secure with the window clamping
brackets. The window clamping brackets
have a raised ‘stop’ that will prevent them
being rotated too far.
©
Baxi Heating U.K. Limited 2010.
Figure 38. Window assembly removal
Figure 39. Window assembly removal
