manualshive.com logo in svg

Baumuller BM4-O-IEI-01, Operating Instructions Manual, Page: 29 / 92

Share
Download
Baumuller BM4-O-IEI-01 Operating Instructions Manual Download Page 29

29

of 90

 Operating Instructions Option Module IEI for b maXX drive PLC BM4-O-

IEI-01

6

C

OMMISSIONING

In this chapter, we will describe how you commission the IEI option module that you just 
assembled and installed (see 

Z

Assembly and installation 

– 

from page 21 onward). Com-

missioning ensures that the IEI option module functions correctly. For more information 
on programming, refer to the "b maXX drive PLC Application Manual".

Before starting commissioning, ensure that the following conditions have been met:

1

The plug-in module has been assembled correctly.

2

The plug-in module has been installed correctly.

3

The cabinet is closed correctly and all the safety devices have been started up.

4

The b maXX basic unit is ready for use.

6.1

General safety regulations

h

Observe the 

Z

Basic Safety Instructions 

– 

from page 7 onward.

6.2

Requirements of the personnel carrying out work

Commissioning work must only be carried out by trained specialists who have understood 
the safety regulations and information and can implement them.

6.3

Description/inspection of the safety and monitoring systems

Before you commission the IEI option module, you must eliminate any errors/error mes-
sages that may be present on the b maXX 4400 basic unit. These errors may be due to 

DANGER 

The following 

will occur

,

 

if you do not observe this danger information:

m

serious personal injury     

m

 death

Danger from: 

mechanical effects. 

At commissioning, the drive can rotate.

Keep far enough the rotating parts. Note that when drives are starting up machine parts can 
be set in motion. In all cases, activate the machine's safety devices.

Summary of Contents for BM4-O-IEI-01





























































































Reviews:

No comments