manualshive.com logo in svg

Baumuller BM4-O-IEI-01, Operating Instructions Manual, Page: 7 / 92

Share
Download
Baumuller BM4-O-IEI-01 Operating Instructions Manual Download Page 7

7

of 90

 Operating Instructions Option Module IEI for b maXX drive PLC BM4-O-

IEI-01

2

B

ASIC

 S

AFETY

 I

NSTRUCTIONS

We have designed and manufactured each Baumüller plug-in module in accordance with 
the strictest safety regulations. Despite this, working with the plug-in module can be dan-
gerous for you. 

In this chapter, we will describe the risks that can occur when working with a Baumüller 
plug-in module. Risks are illustrated by icons. All the symbols that are used in this docu-
mentation are listed and explained.

In this chapter, we cannot explain how you can protect yourself from specific risks in in-
dividual cases. This chapter contains only general protective measures. We will go into 
concrete protective measures in subsequent chapters directly after information about the 
individual risk.

2.1

Hazard information and instructions

Hazards are always divided into three danger classifications. Each danger classification 
is identified by one of the following words:

DANGER

 

m

 Considerable damage to property   

m

 Serious personal injury   

m

 Death  

will

 occur

WARNING

 

m

 Considerable damage to property   

m

 Serious personal injury   

m

 Death 

can

 occur

WARNING

The following 

may occur

,

 

if you do not observe this warning information:

m

serious personal injury     

m

 death

The hazard information is showing you the hazards which can lead to injury or even to 
death.

Always observe the hazard information given in this documentation.

Summary of Contents for BM4-O-IEI-01





























































































Reviews:

No comments