Commissioning
Operation Manual
b maXX safe PLC
BMC-M-SAF-02
Document no.: 5.07020.04
63
11
11.3 Requirements on the personnel conducting the work
The commissioning work may only be conducted by professionally trained personnel, in
particular persnnel which understands the safety regulations and can follow them.
11.4 Description/inspection of the safety and monitoring equipment
Before commissioning the b maXX safe PLC module, you will have to make sure that the
+24 V supply is properly connected to the power supply for the b maXX controller/safe
PLC and that the +24 V supply matches the specifications. You may only proceed with
the commissioning once you have inspected this and ensured that everything is in order.
Note that you can only put the b maXX safe PLC into operation together with the power
supply and any additional system components during the commissioning process.
11.5 Loading applications
See
>
Application Manual b maXX safe PLC
<
.
11.5.1 Downloading projects from the PC
See
>
Application Manual b maXX safe PLC
<
.
11.6 Setting the station number
1
The station number setting is activated by pushing the S1 button on channel 2 of the
PLC and the S1 button on the BMC-M-PSB-02 power supply simultaneously.
2
After pushing the buttons, the LED on rotary switch S2 (1st digit) on the power supply
will light up.
3
The 7-segment display on channel 2 of the PLC will blink and show the value of rotary
switch S2 on the power supply.
4
The value of the 1st digit of the station number can now be set on the rotary switch.
5
Push the S1 button on channel 2 of the PLC and the S1 button on the BMC-M-PSB-02
power supply.
6
The LED on rotary switch S2 will remain set and the 7-segment display on channel 2
of the PLC will stay lit and display the values overtaken from rotary switch S2 of the
power supply.
7
The value set is confirmed by pushing the S1 button on channel 2 of the PLC and the
S1 button on the BMC-M-PSB-02 power supply once again. In doing so, the user will
have to compare the rotary switch position with the value displayed. If an error is indi-
cated in the process, the safety control will have to be sent back to Baumüller for repair.
8
The LED on rotary switch S3 of the power supply will light up and the 7-segment dis-
play on channel 2 of the PLC will blink and display the value of rotary switch 3.
9
After this, conduct the settings for the second digit, beginning again at step 4, the same
way for rotary switches S3 through S5.
Summary of Contents for b maXX BMC-M-SAF-02
Page 119: ......
