Safety
Operation Manual
b maXX safe PLC
BMC-M-SAF-02
Document no.: 5.07020.04
19
4
4.4
Operator responsibility
The device is implemented in an industrial zone. The operator of the device is thus sub-
ject to the legal work safety obligations.
In addition to the work safety instructions in this Operation Manual, the safety, accident
prevention and environmental protection regulations applicable to the area of application
of this device must also be complied with. In doing so, the following applies in particular:
m
The operator must inform himself of the applicable work safety regulations and addi-
tionally ascertain hazards arise through the special work conditions at the place of use
of the device in a risk assessment. The operator must implement this in the form of op-
eration instructions for the operation of the device.
m
This Operation Manual must be kept in the immediate vicinity of the device and be ac-
cessible to persons working on and with the device at all times.
m
The statements of the Operation Manual are to be followed completely and absolutely!
m
The device may only be operated in technically faultless condition and must be safe for
operation.
4.5
Protective equipment
All BMC-M-xxx-xx devices must be built into a suitable electrical cabinet in order to com-
ply with the protective categories (IP22) required in EN61800-5-1, Chapter 4.2.3.3.
Protection category
BMC-M-SAF-0x
IP 20
DANGER!
Life-threatening danger through electric current!
Immediate life-threatening danger is present if contact with live parts is made.
Therefore:
m
Operate the device in an electrical cabinet which provides protection from direct
contact with the devices and meets the requirements of at least EN 61800-5-1,
Chapter 4.2.3.3.
Summary of Contents for b maXX BMC-M-SAF-02
Page 119: ......
