Assembly instructions
Operation Manual
b maXX safe PLC
BMC-M-SAF-02
Document no.: 5.07020.04
Baumüller Nürnberg GmbH
52
9.5
6
Set the module block onto the 35 mm C-rail and hold it firmly.
7
Pull the orange handle on the right part of the power supply further forward and press
the module block backward at the same time.
8
Release the orange handle. The right part of the power supply will engage with the
35 mm C-rails.
9
Push the orange handle into the module. This will prevent the orange handle from be-
ing broken off accidentally.
10
Push the white handle on the bottom of the left part of the power supply to the right.
This will cause the white handle to unlatch and the left part of the power supply to en-
gage with the 35 mm C-rail.
Repeat this step with the b maXX safe PLC (3 handles with the BMC-M-SAF-02; 4
handles with the BMC-M-SAF-02 with memory card module). This will cause the
fb maXX safe PLC to engage with the 35 mm C-rail.
Repeat this step with additional system components for the b maXX safe PLC (which
are plugged into the left side of the b maXX safe PLC), if any. This will cause the ad-
ditional system components to engage with the 35 mm C-rail.
11
You can now mount additional system components (such as I/O modules on the right
side of the power supply. Follow the applicable operating instructions in the process.
The assembly of the b maXX safe PLC module is now complete. Information on connect-
ing lines and commissioning can be found in the following sections.
Summary of Contents for b maXX BMC-M-SAF-02
Page 119: ......
