Baumer EAL580 MT Series Manual Download Page 5 | Manualshive

Page: 5 / 74

background image

Baumer_EAx_PROFINET_EN_202011_MNL.docx

5/74

www.baumer.com

11.20

Disclaimer of liability

The present manual was compiled with utmost care, errors and omissions reserved. For this reason
Baumer rejects any liability for the information compiled in the present manual.
Baumer nor the author will accept any liability for direct or indirect damages resulting from the use of the
present information.

At any time we should be pleased receiving your comments and proposals for further improvement of the
present manual.

Created by:
Baumer IVO GmbH & Co. KG
Villingen-Schwenningen, Germany

Registered trademarks

SIEMENS

®

, SIMATIC

®

, Step7

®

, S7

®

, TIA

®

and „TIA Portal

®

“ are registered trademarks of Siemens

®

AG.

PROFINET, the PROFINET Logo and PROFIdrive are registered trademarks of the PROFIBUS user
organization respectively of PROFIBUS International (PI).These names mentioned in the present manual
and other names that may be registered trademarks are not marked correspondingly. Having omitted the
respective marking does not necessarily imply that the names are not registered trademarks or that there are
no existing patents and protected patented designs.

Change history

This document is subject to changes. The latest version is available at www.baumer.com.

Document
index

Date

Firmware
revision

Author

Changes

0001

05.18

1.2.0

div.

Initial version
(replaces all draft documents)

0002

09.20

1.3.0

div.

Important changes:
editorial changes and
revision of following chapters:
- 3.2.3 ("Push Button for Preset / Reset")
- 4.1 ("Importing the GSDML file")
- 4.3.2 ("Automatic Name Assignment")
- 4.6.4 ("Total measuring range")
- 4.6.13 to 4.6.16 (Getriebefaktor)
- 4.6.17 ("Important Note for Multiturn
Encoder Operation")
- 4.7.1 ("I/O Point Fault OB")
- 5.1 ("Importing the GSDML file")
- 5.3.2 ("Automated name allocation")
- 5.9.2 ("Parameter reset using the optional
push button")
- 6.3 ("Link/Activity (L/A) LEDs")
- 6.4.3 ("Telegram 101: 32 Bit I")
- 6.4.9 ("Control Word G1_STW1")
- 6.4.11 ("Status Word G1_ZSW1")
- 6.5 ("Speed")
- 6.6.2 ("Preset in PROFIdrive telegrams 81 to
83")
-

6.6.3 (“Preset using the Push Button”)

- 7.2 ("I&M functions (identification and
maintenance)")
- 7.3.3 ("Base Mode Parameter Access")
- 7.4.12 ("Parameter 61000: NameOfStation")
- 7.4.14 ("Parameter 61002: MacOfStation")

«
...
3
4
5
6
7
...
»

Summary of Contents for EAL580 MT Series











































































Reviews:

No comments

Related manuals for EAL580 MT Series

Brand: Patton electronics Pages: 16

Brand: Danfoss Pages: 36

Brand: Danfoss Pages: 7

Brand: Danfoss Pages: 16

VLT 2800 Series

Brand: Danfoss Pages: 34

VLT AutomationDrive FC 300

Brand: Danfoss Pages: 60

VLT 5000 Series

Brand: Danfoss Pages: 63

Brand: All-Power Pages: 35

CO-SinusUPS-400W

Brand: Adler Power Pages: 4

Brand: M-system Pages: 3

Brand: AJA Pages: 43

Brand: Midea Pages: 86

Brand: Schumacher Electric Pages: 40

Brand: Badger Power Electronics Pages: 29

Brand: Vicruns Pages: 212

E70ACMS4 Series

Brand: Lenze Pages: 20

Brand: Sabrent Pages: 7

PWRIG100012120S

Brand: AIMS Power Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands