16
4.7 USING THE MACHINE
The BMA INTER-ROW WEEDER for mechanical weeding/earthing-up is manufactured
with two adjustment possibilities:
•
electro-pneumatic using the tractor’s pneumatic system through the use of the
control unit supplied (for per BMA CLASSIC, REV, 2T COMPACT, 2T REV IN-
TER-ROW WEEDERS);
•
manual for head inversion (for BMA MANUAL ECO, GRUBBING INTER-ROW WE-
EDERS).
The BMA INTER-ROW WEEDER equipped with a control unit can be adjusted by the
operator directly from the tractor’s driving seat according to the pneumatic system
on the tractor itself. Should it be necessary make adjustments during the weeding
process, the tractor must necessarily be stopped before the new adjustment is made.
The machine can be equipped with an oil tank and pump kit, in other words a separate
pneumatic system independent from the tractor, setup directly on the BMA INTER-ROW
WEEDER (see FIG. 15) which can be used via the above-mentioned control unit.
CAUTION!
THIS MACHINE SETUP MODIFICATION MUST UNDER ALL CIRCUMSTAN-
CES BE AUTHORISED BY BATTISTOTTI MACCHINE AGRICOLE S.r.l.. CAUTION! THE
BMA INTER-ROW WEEDER EQUIPPED WITH AN OIL TANK AND PUMP KIT MUST BE
USED WITH THE TRACTOR ENGINE AT 350 RPM.
In order to make the connection to
the tractor from the idle position (see
FIG. 16) you need to connect to the
power take off using the bayonet
coupling supplied (see FIG. 17).
FIG. 16
FIG. 15
FIG. 17
Summary of Contents for BMA INTER-ROW 2T COMPACT
Page 35: ...35 ...
