USER MANUAL BATMODE 2S/2S+ SYSTEM
6
2.1.8
Analog Temperature Sensor Connector (exclusively BATmode 2S+)
To acquire temperature data a temperature sensor can be connected to the BATmode 2S+ system via
a mini-XLR connector (see Table 6). The BATmode 2S+ is specified for the temperature sensor
integrated in the system´s antenna disc. The corresponding pin connection is presented in Table 6.
Table 6: Pin connection of the temperature sensor connector
Pin-Number
Description
1
Ground
2
Sensor output
3
Power supply
Do not use unauthorized temperature sensors und connection wires, since
this can cause system failure, damage and the loss of data.
2.1.9
Analog Precipitation Sensor Connector (exclusively BATmode 2S+)
To acquire precipitation data a precipitation sensor can be connected to the BATmode 2S+ - System
via a mini-XLR connector (see Table 7). The BATmode 2S+ is specified for the Infrared Precipitation
Sensor 5.4103.20.041 manufactured by Adolf Thies GmbH & Co. KG. It can be purchased including a
suiting connection cable from bat bioacoustictechnology. The corresponding pin connection is
presented in Table 7.
Table 7: Pin connection of the precipitation sensor connector
Pin-Number
Description
1
Ground
2
Sensor output -
3
Not connected
4
Sensor
Do not use unauthorized precipitation sensors und connection wires, since this
can cause system failure, damage and the loss of data.
