BAT BATmode 2S, User Manual

Page: 13 / 74

USER MANUAL BATMODE 2S/2S+ SYSTEM 4
2.1.1 On-/Off-Switch
The On-/Off-Switch allows to switch the system on or off. Table 1 lists all possible system states in
dependency of the duration the switch is pressed.
Table 1: System state in dependency of the duration the on-/off-switch is pressed
If the system is
in the following
state…
… and the On -/Off-switch is
pressed for…
…the system
changes to the
following state
Off less than four seconds On
On less than four seconds Shutdown
On more than six seconds Off
In case of power failure, the BATmode system will restart automatically when power returns.
2.1.2 Power LED
The white Power LED shows the state of the BATmode.
Table 2
depicts all possible states of
the Power LED.
Table 2: States of the Power LED
LED state Description
Off Device off
Continuously on Device on
2.1.3 Status LED
The blue-red Status LED shows the monitoring state.
Table 3
depicts all possible states of the
Status LED.
Table 3: States of the Status LED
LED state Description
Off BATcontrol software not started
Blue BATcontrol software started,
monitoring off
Blue blinking BATcontrol software started,
monitoring on
Blue-red blinking Monitoring start not possible –
Please check calibration and
UltraSoundGates