BE1-47N Manual Change Information
7-1
SECTION 7 • MANUAL CHANGE INFORMATION
CHANGES
This section contains information concerning the previous editions of the manual. The substantive changes to
date are summarized in Table 7-1.
Table 7-1. Changes
Revision
Change
ECA/Date
D
Pages 1-3 and 4-1: The 0.2 A minimum current required for
"current operated" targets is not limited to dc, as was formerly
stated. (Ac serves equally well.)
Page 1-3: Negative sequence voltage timing accuracy restated
for clarification.
Page 3-5: Figure 3-3 replotted to improve representation.
Pages 4-2 thru 4-5: Operational tests and verification tests
revised for clarification.
Page 4-5, Step 5: Result corrected.
Page 4-7: Projection mounting drawings corrected.
Section 6 added.
11288/11-22-89
E
Deleted reference to Service Manual 9 1704 00 620. Added
Phase Rotation Sensitivity to Section 1. Updated the Dielectric
Test information. Changed Input Voltage Range and Burden Data
in Power supply table in
Specifications. Also added RFI and UL
information. Corrected Style Chart by changing power supply
type T from “230 Vac” to “240 Vac” and deleting from Target
Option N) None. Added new power supply information to
Section 3 in
Power Supply paragraph starting with “Basler
Electric enhanced the power supply design...”. Added new
dimension figures to include all options available (S1 Single-
Ended and Double-Ended, and both mounting positions).
Separated old Section 4 into two sections, “Section 4 Installation”
and “Section 5 Testing.” Changed the format of the manual.
16905/08-98
F
Replaced the S1 Case drawings in section 4 with the new S1
Case drawings. Replaced the old style chart in Section 1 with the
new style chart.
12267/02-09-01
www
. ElectricalPartManuals
. com
