- 26 -
•
Wash the lid and grid with warm water and a mild cleaning agent. Rinse with clean
water and dry using a soft cloth.
Heating liquids
•
Drinkable liquids must always be in the container before the device is turned on.
Do not pour undrinkable liquids such as acids, bases, oils, nitrates etc. into the
device!
CAUTION!
Never turn on the device without liquid inside, as this may damage the enamel
coating and grid.
•
The device is equipped with an overheating/dry heating protection function. If the
device is accidentally left on with too little or no water, this function will be activated
and the device will turn off automatically.
Turn the temperature dial to the "OFF" position, remove the device’s plug from its
socket and wait at least 30 minutes for it to cool. After cooling, refill the tank with fresh
water and resume using the device normally.
•
Before pouring liquids into the device, ensure that the spout is closed.
•
Pour a drinkable liquid into the tank of the mulled wine pot / boiling water canner.
Observe the "MIN" and "MAX" markings inside the device!
WARNING! Danger of electric shock!
Do not allow liquids to splash when the device is in use to avoid damage to
electronics systems. Users may be electrocuted as a result.
•
Turn the temperature dial to the "OFF" position.
•
Connect the device to a single grounded outlet.
•
Always place the lid on the tank before turning it on, and leave it there while the
device is heating.
WARNING! Danger of burns!
When opening the lid there is a danger of burns from steam and condensation.
Carefully lift the lid so that condensation flows into the tank.
