background image

IMPORTANT SAFETY INFORMATION

GENERAL SAFETY WARNINGS

Read all safety warnings and instructions. Failure to follow the warnings and instructions 

may result in electric fire and/or serious injury. Save all warnings and instructions for future 

reference. 

SAFETY 

The warnings, precautions, and instructions discussed in this instruction manual cannot cover 

all possible conditions and situations that may occur. It must be understood by the operator that 

common sense and caution are factors which cannot be built into this product, but must be supplied 

by the operator. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS 

before operating. Failure to follow the safety rules and other basic safety precautions may result in 

serious personal injury.

1

Read and understand all instructions. Failure to follow all instructions may result in serious injury or 

property damage.

DO NOT

 allow persons to operate or assemble the product until they have read this manual and have 

developed a thorough understanding of how it works.

DO NOT

 modify this product in any way. Unauthorized modification may impair the function and/or  

safety and could affect the life of the product. There are specific applications for which the product was 

designed. 
This appliance is for household use only. It is not intended for commercial, Maritime or RV applications.
The appliance is intended for indoor use only. 

DO NOT

 use outdoors.

Use only detergents or softeners recommended for use in this manual and keep them out of the reach 

of children.

DO NOT

 unplug your appliance by pulling on its power cord. 

ALWAYS

 grasp the plug firmly and pull it

straight out from the outlet.

DO NOT

 operate any appliance that has a damaged cord or plug, if it is damaged or malfunctions in any

way, or if the outlet is not in proper working order. Contact customer service or a service technician.

ALWAYS

 turn off and unplug from outlet before servicing, changing accessories or cleaning the unit. 

Allow unit to cool down completely before cleaning, moving or servicing. Turning the unit off does not 

disconnect it from the power source.

DO NOT

 put anything flammable or explosive in, on, or near the appliance. 

DO NOT

 wash articles of

clothing or items that have been soaked in flammable or explosive chemicals.

ALWAYS

 wait for the washer tub to completely stop moving before reaching in to add or remove any

clothes. 

DO NOT

 wash clothes that have been previously exposed to gasoline, solvents or other flammable 

substances. 

DO NOT

 operate this washer unless all enclosure panels are properly installed.

DO NOT

 tamper with or modify the controls.

Summary of Contents for 99809





















Reviews: