Barton 99809 Owner'S Manual And Safety Instructions Download Page 3

IMPORTANT SAFETY INFORMATION

2

WARNING

: Risk of child entrapment. 

DO NOT

 allow children to play on or in the appliance. Close 

supervision of children is necessary when the appliance is used around them.

The appliance must be plugged into a properly installed and grounded outlet that meets the voltage 

requirements listed on the ratings label.

CAUTION: 

The power cord is equipped with a 3-prong grounding plug to protect against shock hazards.

ALWAYS

 plug the cord into a properly installed and grounded 3-prong wall receptacle, and 

DO NOT 

remove the grounding prong.

Keep the fuel supply hose away from any heated surfaces.
Under certain conditions, hydrogen gas may be produced in a household hot water system that has not

been used for two weeks or more. Hydrogen gas is highly explosive. If the hot water system has not been

used for more than two weeks, turn on all hot water faucets and let the water flow for several minutes

prior to using your compact washer.

DO NOT

 modify or repair the unit by yourself. Contact customer service or a qualified service technician if

service is required.

To reduce the risk of electric shock or fire, 

DO NOT

 use an extension cord or outlet adapters to connect 

the unit to an electrical power source. The appliance must be properly grounded using a three-prong 

electric receptacle wall outlet.

DO NOT

 install the washing machine in a moist or wet area, or where it can get wet. 

DO NOT

 spray with

water when cleaning.

DO NOT

 put children on top of, or allow children to climb in or on, the washer.

Regularly clean the power plug to remove dust and dirt, in order to prevent electrical failure.

It is recommended to unplug the unit when it is not in use.

ALWAYS

 be sure to properly and securely connect the power cord to the outlet, and the water hoses to

prevent leakage or electrical shock.

DO NOT

 operate the unit or handle the plug with wet hands.

DO NOT 

ground the appliance to a gas pipe, plastic water pipe or telephone line. Improper grounding 

may lead too electric shock.

DO NOT

 wash raincoats, heavy jackets, or similar, heavy items.

DO NOT

 put heavy or hot items on top of the machine. 

DO NOT

 wash laundry soaked with petrol and organic solvent. 

DO NOT

 share on power source with other appliances. 

DO NOT

 use an unappointed power source. 

Keep the plug strip clean. 

DO NOT

 place the machine in the bathroom. Such action may damage the electrical insulation and 

cause the body to rust. 

Plug the power cord into an AC 120V/60Hz wall socket rated at 15 AMPS or higher. Use the socket for 

this appliance only. 

DO NOT 

use an extension cord. 

DO NOT 

use an electric transformer. It could result in electric shock or fire. 

Remove all foreign substances such as dust or water from the power plug terminals and contact points 

using a dry cloth on a regular basis.

Summary of Contents for 99809





















Reviews: