Barton 99809, Owner'S Manual And Safety Instructions

Page: 6 / 20

5
INSTALLATION INSTALLATION
ACCESSORIES
TOOLS NEEDED FOR INSTALLATION
KEY DIMENSIONS AND SPECIFICATIONS
CHOOSING THE PROPER LOCATION
FLOORING: For the best performance, you must install your washer on a solidly constructed floor. Wood
floors may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting and soft
tile surfaces are contributing factors to vibration which can cause your washer to move slightly during the spin
cycle.
DO NOT
install your washer in areas where water may freeze. Since your washer retains some water in
its water valve, pump and hose areas. Frozen water can damage the belts, pump and other components.
NEVER install on a platform or weakly supported structure.
ELECTRIC
Use 120V/60Hz 15 AMPS fuse or circuit breaker. Individual branch circuit serving only for your washer is
recommended. NEVER use an extension cord with this appliance.
GROUNDING: Electrical grounding is required for this washer. In the event of a malfunction, grounding
will reduce the risk of electric shock by providing a path of least resistance for the electric current. This
appliance is equipped with a power cord having a three-prong grounding plug for use in a properly installed
and grounded outlet. The plug MUST be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
NEVER connect the ground wire to plastic plumbing lines, gas lines or hot water pipes.
DIMENSIONS:
400X430X720mm
PACKING SIZE: 505X515X780mm