Barton 99809, Owner'S Manual And Safety Instructions

Page: 13 / 20

OPERATION
CYCLE GUIDE
CLEANING AND MAINTAINING THE MACHINE
Cleaning the Exterior: Turn off the water faucets after finishing the day’s washing. This will shut off the water
supply to your washer and prevent damage from escaping water. Leave the lid open to allow the inside of
your washer to dry out. Use a soft cloth to wipe up all the detergent. Clean the following as recommended:
Cleaning the Control Panel: Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads.
Do not spray cleaners directly onto the panel.
Cleaning the Interior: Clean the interior of your washer periodically to remove any dirt, soil, odor, mold,
mildew or bacterial residue that may remain in your washer as a result of washing clothes.
Cleaning the Tub: Run an express cycle with some bleach every month to clean the tub. This will also help
to remove mold which may occur inside the washer.
Cleaning the Lint Filter:
There is a built-in lint filter in your washer. It can help to collect lint during washing
cycle. It is suggested to clean the lint filter every 10 cycles. Take it out and clean the filter with water. Then
place it back in the washer.
Cleaning the Pump Filter: There is a pump filter in your washer. It can help to protect the pump during
washing cycle. Clean the pump filter once every month.
12