Trouble Shooting
Mobile Computer
MC 9190
ex
-NI
Type B7-A28.-…………
Page 34 of 50
Technical data subject to change without notice.
Issue: Revision 2 / August 2012
5
Commissioning
The operator of an electrical system in a hazardous environment must keep the operating
equipment in an orderly condition, operate it correctly, monitor it and do the required
maintenance and repairs.
Before commissioning the MC 9190
ex
-NI, check that all components and documents are
there.
The following conditions must be met before the device may be commissioned:
−
Check the MC 9190
ex
-NI for damage to display, scanner window and the enclosure.
−
Check that the used battery is a certified one.
−
Make sure that the battery is changed before insert in the MC 9190
ex
-NI.
−
Check when use a screen protector that it is a certificated one.
−
Strap, attached to the MC 9190
ex
-NI
−
Stylus, in the stylus silo
−
Manual inside of the box
5.1.1
Display
Note
Use only the stylus included with the device to operate the touch screen. A biro, for
example, could scratch or even destroy the touch screen.
The Mobile Computer must be treated carefully as the sensitive touch screen has a
glass pane which can break if subjected to a lot of strain or let fall. The guarantee will
be void if it is apparent that the damage to the touch screen is due to inappropriate use.
MC 9190
ex
-NI with protective film
Take off the protective film
The display as supplied from the factory is covered with a protective film. Remove the
protective film before using the device.
